| Name of chemical agent |
Concentration |
IVY573 |
Welding Rod 6171 |
| 1 |
Acid & Alkali |
Hydrochloric acid (HCl) |
1% |
VG |
VG |
| 2 |
0.5% |
VG |
VG |
| 4 |
Sulfuric acid (H2SO4) |
1% |
VG |
VG |
| 6 | Nitric acid (HNO3) |
1% |
VG |
VG |
| 7 | Phosphoric acid(H3PO4) |
1% |
VG |
VG |
| 8 | Acetic acid (CH3COOH) |
1% |
VG |
VG |
| 9 | Hydrogen fluoride(HF) |
1% |
VG |
VG |
| 10 |
0.5% |
VG |
VG |
| 11 | Hydrogen peroxide solution(H2O2) |
1% |
VG |
VG |
| 12 | Sodium hydroxide (NaOH) |
1% |
VG |
VG |
| 13 | Ammonia solution (NH3) |
1% |
VG |
VG |
| 14 | Sodium hypochlorite (NaClO) |
1% |
VG |
VG |
| 15 |
0.5% |
VG |
VG |
| 16 | Solvent | METHANOL (Methyl alcohol) | 100% | VG |
VG |
| 17 | ETHANOL (Ethyl alcohol) | 100% | VG |
VG |
| 18 | ISOPROPANOL (Propan-2-ol) | 100% | VG |
VG |
| 19 | BUTANOL (Butyl alcohol) | 100% | VG |
VG |
| 20 | ETHYLENE GLYCOL (Ethylene glycol) | 100% | VG |
VG |
| 21 | ACETONE (Acetone) | 100% | BAD /Soluble |
BAD /Soluble |
| 22 | TOLUENE (Toluene) | 100% | BAD /Soluble |
BAD /Soluble |
| 23 | Others | Sodium chloride (NaCl) |
1% |
VG |
VG |
| 24 | Ammonium fluoride (NH4F) |
1% |
VG |
VG |
| 25 | Potassium chloride (KCl) |
1% |
VG |
VG |
| 26 | Detergent |
1% |
VG |
VG |
|
| * The above data are a series of test
results and given here without guarantee. |
Evaluation method: : JIS A5705 Staining
Resistance for Resilient Floor Coverings
2ml of chemical is mounted
on IVY573. The specimen is kept in cotact with the chemical for
24hrs at 23degree C. After 24hrs, specimen was rinsed with water
and its Surface Appearance were observed. |
| Evaluation result: |
VG:
SC:
BAD: |
No change observed
Slight change observed
Significant change observed |
|
Note: Remember to use waste rug, sponge,
or other soft materials to clean panels.
Scrubbing surfaces with a metal brush or other improper materials can result
in scratched or damaged surfaces. |
|
