 |
Values of physical
properties herein are presented as typical test results in Takiron
Co., Ltd. , and are considered accurate to the best of our knowledges.
It is offered solely for your consideration, examination and verification,
and is not to be construed as a representation or warranty expressed
or implied, for which Takiron Co., Ltd. assumes any legal responsibility.
Our warranties are limited to those expressly stated in the formal
contracts or in conditions of sale on our invoices and order acceptances.
Conditions and methods of use may vary and are beyond the control
of Takiron Co., Ltd., therefore, Takiron Co., Ltd. disclaims any
liability incurred as a result of the use of Takiron Plates in
accordance with the values of physical properties herein.
No information herein shall be construed as an offer of indemnity for infringement
or as a recommendation to use Takiron Plates in such a manner as to
infringe any patent, utility model and design, domestic or foreign. The
values of physical properties of Takiron Plates cannot be automatically
used when engineering finished fabricated components; and the fabricator
or end user is responsible for insuring the suitability of Takiron Plates
for their specific application or end use.
THERE ARE NO WARRANTIES AS TO TAKIRON PLATES DESCRIBED HEREIN. EITHER
EXPRESSED OR IMPLIED. INCLUDING, BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY
OR FITNESS FOR PARTICULAR PURPOSE. |
 |
| Notes
on Handling Takiron Plates |
1.Notes on usage
- 1-1.
- For the best suitable selection of Takiron Plates, ensure to carefully
check temperature, chemicals, ultra violet effect, external stress and
other actual conditions on which Takiron Plates are to be used.
- 1-2.
- In your design, it is important to consider not only the theory of
strength calculation but also your experiences related to the fabricating
conditions and methods.
- 1-3.
- Figures of physical properties and other aspects are typical test
values, not guaranteed performances.
- 1-4.
- According to your intended use, ensure to select suitable Takiron Plates.
- 1-5.
- Ensure that Takiron Plates are not in contact with materials that
may contain harmful substances to the plates, such as flexible PVC
and rubber.
|
2.Notes on fabricating
- 2-1.
- During your fabricating of Takiron Plates, ensure to wear the protections such as gloves and goggles according to necessity and use appropriate machines and tools.
- 2-2.
- During your cutting and welding of Takiron Plates, gas may be generated. Ensure that the fabricating room is adequately ventilated.
- 2-3.
- When you use adhesives and solvents, there is a risk of gas poisoning, fire, gas explosion and other accidents. Be careful of fire, and ensure there is adequate ventilation. Take the correct precautions according to the notes and indications on the materials to be used.
|
3.Notes on storage and transportation
- 3-1.
- During storing and transporting Takiron Plates, ensure to keep the plates placed horizontally. If Takiron Plates are stored and transported leaning against a wall, the plates may warp.
- 3-2.
- It should be noted that some masking materials protecting Takiron Plates may not peel off, if the plates become wet.
- 3-3.
- Ensure that Takiron Plates and their fabricated plates are not exposed to direct sunlight. Don't store and transport them in a high temperature environment.
|
4.Notes on disposal
- 4-1.
- If you dispose of Takiron Plates, always dispose the plates as industrial waste in compliance with the relevant laws and regulations.
|
|
