 |
Values of physical
properties herein are presented as typical test results in Takiron
Co., Ltd. , and are considered accurate to the best of our knowledges.
It is offered solely for your consideration, examination and verification,
and is not to be construed as a representation or warranty expressed
or implied, for which Takiron Co., Ltd. assumes any legal responsibility.
Our warranties are limited to those expressly stated in the formal
contracts or in conditions of sale on our invoices and order acceptances.
Conditions and methods of use may vary and are beyond the control
of Takiron Co., Ltd., therefore, Takiron Co., Ltd. disclaims any
liability incurred as a result of the use of Takiron Static Dissipative
Plates in accordance with the values of physical properties herein.
No information herein shall be construed as an offer of indemnity for infringement
or as a recommendation to use Takiron Static Dissipative Plates in such
a manner as to infringe any patent, utility model and design, domestic
or foreign. The
values of physical properties of Takiron Static Dissipative Plates cannot
be automatically used when engineering finished fabricated components;
and the fabricator
or end user is responsible for insuring the suitability of Takiron Static
Dissipative Plates for their specific application or end use.
THERE ARE NO WARRANTIES AS TO TAKIRON STATIC DISSIPATIVE PLATES DESCRIBED
HEREIN. EITHER EXPRESSED OR IMPLIED. INCLUDING, BUT NOT LIMITED TO ANY
WARRANTY OF MERCHANTABILITY
OR FITNESS FOR PARTICULAR PURPOSE. |
 |
| Notes
on Handling Takiron Static Dissipative Plate |
1.Notes on usage
- 1-1.
- For the best suitable selection of Takiron Static Dissipative Plates,
ensure to carefully check temperature, chemicals, ultra violet
effect, external stress and
other actual conditions on which Takiron Static Dissipative
Plates are to be used.
- 1-2.
- In your design, it is important to consider not only the theory of
strength calculation but also your experiences related to the fabricating
conditions and methods.
- 1-3.
- Figures of physical properties and other aspects are typical test
values, not guaranteed performances.
- 1-4.
- According to your intended use, ensure to select suitable Takiron
Static Dissipative Plates.
- 1-5.
- Ensure that Takiron Static Dissipative Plates are not in contact
with materials that may contain harmful substances to the plates, such
as flexible PVC
and rubber.
|
2.Notes on fabricating
- 2-1.
- During your fabricating of Takiron Static Dissipative Plates,
ensure to wear the protections such as gloves and goggles according to necessity
and use appropriate machines and tools.
- 2-2.
- During your cutting and welding of Takiron Static Dissipative
Plates, gas may be generated. Ensure that the fabricating room is adequately
ventilated.
- 2-3.
- When you use adhesives and solvents, there is a risk of gas poisoning, fire, gas explosion and other accidents. Be careful of fire, and ensure there is adequate ventilation. Take the correct precautions according to the notes and indications on the materials to be used.
|
3.Notes on storage and transportation
- 3-1.
- During storing and transporting Takiron Static Dissipative
Plates, ensure to keep the plates placed horizontally. If Takiron Static
Dissipative Plates are stored and transported leaning against a wall, the
plates may warp.
- 3-2.
- It should be noted that some masking materials protecting
Takiron Static Dissipative Plates may not peel off, if the plates become
wet.
- 3-3.
- Ensure that Takiron Static Dissipative Plates and their
fabricated plates are not exposed to direct sunlight. Don't store and transport
them in a high temperature environment.
|
4.Notes on disposal
- 4-1.
- If you dispose of Takiron Static Dissipative Plates, always
dispose the plates as industrial waste in compliance with the relevant laws
and regulations.
|
|
